Sound Mitigation Buffer Tube Kit: Armaspec Sound Mitigation Buffer AR10 Gen 3 and Strike Industries End Plate and Castle Nut

The USA-made Armaspec Sound Mitigation Buffer AR10 Gen 3 features a single-stage drop-in replacement for your AR-10 buffer and spring. The innovative design keeps the buffer spring from rubbing against the inner wall of the buffer tube which creates a smooth, quiet operation. This Sound Mitigation Buffer also has adjustable spring weights to allow for ultimate customization. It can be installed in three easy steps:

1. Insert the polymer base with a guide rod into the buffer tube.

2. Insert desired spring on the guide rod.

3. Insert the buffer over the spring.

This Armaspec Sound Mitigation Buffer AR10 Gen 3 is a complete game-changer.

FEATURES:

Single-stage drop-in replacement for your AR-10 buffer and spring

Reduce felt recoil

Keep the buffer spring from rubbing against the inner wall of the buffer tube providing smooth and quiet operation

Adjustable spring weight (*Main spring can be trimmed at .25 lbs per coil to reduce tension up to a max of 12 coils)

Made in the U.S.A.

SPECIFICATIONS:

Actual Weight (Complete System): 7.20 oz.

Equivalent Weight: 4.7 oz.

COMPATIBILITY:

AR-10/6.5 Creedmoor

INCLUDES:

1x Polymer Base Guide Rod

If you need the 6-Position Aluminum 6061-T6 (buffer tube) Machined to Mil-Spec dimensions, we offer it separately. No other parts are included just the tube.

SPECIFICATIONS:

Length: 7.25"

The SI Multi-Function End Plate and Anti-Rotation Castle Nut are designed to update and upgrade the often neglected castle nut and endplate system. While the traditional endplate and castle nut work extremely well in retaining your receiver extension, the peening of the castle nut is not conducive to rebuilding. With the vast amount of aftermarket support for the AR system today, Strike Industries felt that there's a need for a secure system as adaptive as you are. Enter the MFEP and ACN. The MFEP and ACN offer an anti-rotate QD socket or sling loops built in. The Anti-Rotation Castle Nut is specifically designed to work with this end plate. Instead of peening the endplate to secure the castle nut, a set screw fulfills this function to allow for multiple uses as you upgrade, or update your build.

The Multi-Function End Plate is reversible and has three integral sling mounting options. A traditional sling loop, a loop for hook-style attachments, and a QD socket give you flexibility in using whichever attachment you prefer.

CONTAINS:

1x Multi Function Endplate

1x Anti-Rotation Castle Nut

1x Detent Set Screw (1.5MM HEX not included)

1x Anti-Rotation Set Screw (1.5MM HEX not included)

FEATURES:

Set screw to retain takedown pin and detent for ease of installation

No peening or staking is needed with the Anti-Rotation Castle Nut/End Plate design

Anti-rotate QD socket

Multiple sling attachment points