Finish Your Build Kit:
Magpul PRS Lite Stock
+ LR-308 Mil-Spec Quality Lower Parts Kit
+ LR-308 Mil-Spec Buffer Tube Kit
+ .308/7.62NATO BCG with Forward Assist Notches QPQ
+ LR-308 Charging Handle Aluminum
Magpul PRS Lite Stock, Adjustable LOP, Adjustable Comb Height, Compatible with Carbine/SR25/A5 Receiver Tubes, Black
General Info: Adding an Adjustable Stock to your rifle build is an essential piece to balancing your rifle & improving a shooter's comfort while in use. Stocks come in all shapes and sizes, a few things to be mindful of when picking your next adjustable stock is what personal application you will be putting your rifle through. Running Drills, Clearing Rooms, Competition Shooting, Hunting, Long Range, Bench shooting, or whatever other application you may need to use your rifle in. Having a comfortable and well-balanced & portable rifle starts with stock.
Brand: Magpul Industries Corporation is an American designer and manufacturer of high-tech polymer and composite firearms accessories.
Weight: This stock features an overall weight of 18.2 oz.
Platform: AR-15 / 10
Carbine Buffer Tube: This stock fits on a Mil-Spec Carbine Buffer using only household tools to initially seat and secure into place. After seating, it can freely adjust to different positions.
QD Sling: The Magpul PRS Lite Stock stock comes with QD attachment points for solid sling mounting.
Sling Loop: The Stock features a sling loop for easy classic mounting without the need for extra hardware.
Material: The Magpul PRS Lite Stock Is made out of glass filled polymer for reliability and impact resistance against the great outdoors.
Finish: The Magpul PRS Lite Stock is finished with a black appearance.
Buttpad: This stock has a rubber buttpad to lighten the felt recoil impulse directed to the shooter.
.308 Mil-Spec Quality Lower Parts Kit (LPK) For AR-10
General Info: Lower Parts Kits include all of the small bits & pieces needed to make your AR-10 / LR-308 Lower fully functional. Such as the mag release, take-down pins, selector, trigger guard, bolt catch, buffer retainer, roll-pins, detents, and small springs are included to allow completion. 'Mil-Spec' kits include stronger springs meant to ignite hardened primers found on M80 Ball, and other 7.62x51mm NATO loads.
Brand: The Mil-Spec LR-308 Lower Parts Kit is produced by Recoil Technologies with high-quality steel & brass components.
Brand Info: .
Platform: 'Mil-Spec' AR-10 / LR-308
FCG Included: The Recoil Technologies LR-308 Lower Parts Kit comes with a Mil-Spec Fire Control Group to ensure reliable operation and ignition of hardened rifle primers.
Grip: The Mil-Spec LR-308 Lower Parts Kit includes an A2 style grip and grip screw to complete your AR-10 / LR-308 lower receiver.
Weight: The overall weight of the Mil-Spec LR-308 Lower Parts Kit is 0.49lbs.
Mil-Spec Buffer Tube
If you are in need of the 6-Position Aluminum 6061-T6 (buffer tube) Machined to Mil-Spec dimensions, we offer it separately. No other parts included just the tube.
SPECIFICATIONS:
Length: 7.25"
LR-308 Collapsible Stock Buffer
FEATURES:
Drop-in installation
Uses standard recoil spring
Fits AR-10/LR-308 with collapsible stock
Length: 2.5"
Weight: 3.7 oz.
Color Buffer May Vary
Mil-Spec Receiver End Plate
Maintains Proper Alignment of Stock & Buffer Tube
M4-style receiver plate includes the engagement tab required to align the buttstock and buffer tube with the lower receiver on carbine models.
Precision, fine blanking process ensures precise edges and superior flatness for correct fit and solid installation.
FEATURES:
Phosphate Finish
Made of 4140 Hardened Steel
AR-15 Carbine Castle Nut
Standard Mil-Spec Castle Nut
LR-308 Carbine Recoil Spring
This Chrome Silicon recoil spring is made by Spring Dynamics to the highest quality standards available. It is stress relieved for long service life and Moly-Plated for corrosion resistance. These springs last for an incredibly long time and do not lose their strength. Test samples of these springs have been tested for over 100,000 rounds without a significant deterioration in power, performance, or reliability.
The Extra Power Buffer Spring is designed for .308 AR Carbine Platforms that use the standard 7" depth M4 buffer tubes and the short 2.5" .308 buffer. Such as DPMS, CMMG, Bushmaster (post-2010), Mega, SA Defense, Colt 901, and many others. The extra power slows the bolt carrier's rearward travel and chambers the next round with more authority. It also works very well in AR-10 rifles with the 7.75" internal buffer tube length and the 3.25" buffers. It is the correct spring to use in either one. If you want a lower power spring in the 7.75" tube with 3.25" buffer you can also use the Sprinco Red spring. But the Orange spring is the stiffer of the two.
FEATURES:
Highest Quality Chrome Silicon Spring available
Moly-Plated
Stress Relieved
Extremely long service life with no degradation in performance
Extra Power spring weight
.308/7.62NATO BCG with Forward Assist Notches QPQ
An LR-308 / AR-10 bolt carrier group is a piece of a firearm that houses many important parts such as the firing pin, gas key, cam pin, extractor, and bolt. With all these pieces working together the BCG can grab and feed another round out of a detachable magazine, chambers and engages the cam groove, engage with the locking lugs in the barrel, fire, and extract a spent cartridge. During the extraction of a cartridge, the BCG works to absorb the force of the explosion by expanding gas in the carrier. During this process gas is tapped off from the barrel and is sent into the cup inside of the gas key, creating an inertial force that sends the Bolt Carrier Group back into the buffer tube which helps to minimize the recoil of your gun when firing and the cycle will repeat for subsequent shots.
About this BCG: This BCG is an AR-10 / LR-308 compatible design, allowing use with .308 Winchester, 7.62 NATO, 6.5 Creedmoor, & .243 Win cartridges. The standard AR-10 / LR-308 bolt carrier is also machined from 9310/8620 Alloy Steel and is completed with a Nitride finish. This BCG comes with the ability to be full-auto compatible and also features forward assist notches. MPI testing has also been done to ensure that there are no structural flaws to this BCG.
Caliber Compatibility: .308 Win, 7.62 NATO, 6.5 Creedmoor, .243 Win - This BCG is standard for the .308 Win, 7.62 NATO, 6.5 Creedmoor, .243 Win calibers, and is interchangeable between all 4 simultaneously.
Finish: Nitride - Nitriding is a process during manufacturing that diffuses nitrogen into the steel to make a case-hardened surface for improved resistance and strength. A Nitrided BCG typically has a gloss black texture. Nitrided Bolt Carriers have increased resistance from heat, and corrosion.
Material: 9310 Alloy Steel - Bolt Head - 9310 Steel is a low alloy steel that is a mixture of nickel, chromium, and molybdenum. This steel is built to have high core hardness and high fatigue strength which make it the perfect steel to hold up in the harsh environments of the bolt head.
Forward Assist Notches: This BCG comes with forward assist notches which allow the forward assist on the upper to contact the BCG pushing it forward and locking the bolt into place. These forward assist notches can also help clear malfunctions in a speedy manner when the BCG becomes jammed.
Gas System: Direct Impingement - Direct impingement is the process of directing the gas created during the operation of a firearm through the barrel, gas block, gas tube, and eventually into the BCG again to cycle the action and prepare the firearm for another round.
LR-308 Charging Handle Aluminum
The Charging Handle on the DPMS LR-308 / AR-10 rifle is a simple latching design that indexes with the gas key on your bolt carrier group, this allows you to charge your rifle, eject and feed rounds manually.
About this Charging Handle: Omega Mfg. offers an extensive line of sporting good products ranging from riflescopes, red dots, flashlights, Iron sights, Mounts and much more accessories. We serve the needs of our consumers by offering a wide variety of accessories for many different firearm platforms.
This is an Omega Mfg. AR-10/LR308 Charging Handle with Steel Latch. It is a standard AR-10 .308 charging handle. It allows operator to lock their bolt open or to chamber a round.
Ambidextrous: This AR-15 charging handle can manipulated from both sides, improving ergonomics for both left and right handed shooters.
Latch Style: A2 Style - The A2 Style Latch is on the left side of the rifle with a minimalist and sturdy design.
Platform: This charging handle is designed for the LR-308 platform. This will work on the AR-15 platform, but the latch will not engage with groove cut on the upper receiver, and it will be a few inches longer.
To view the most up-to-date shipping times Click HERE. To view Warranty, Returns, Terms & Restrictions Click HERE. 
