Finish Your Build Kit Short Buffer Pistol:
Recoil Technologies Complete Mil-Spec Lower Parts Kit (LPK)
+ Recoil Technologies AR-15 5.56/.223/.300/.350 Complete Bolt Carrier Group
+ United Defense AR-15 "Holy" Ambidextrous Charging Handle
+ Omega Mfg. AR-15 End Plate with Center QD Sling Swivel Point *Made In USA*
General Info: Getting all the parts you need to complete your lower can be extremely tedious. Lower parts kits take all the guesswork out of finishing your lower because all the pieces you need are included. This USA-made Recoil Technologies Complete Mil-Spec Lower Parts Kit comes with a standard right-hand safety selector. The fire control parts are MPI and Rockwell tested to ensure these parts meet the quality standards. This lower parts kit is the key to effortlessly completing your lower.
Brand: The Mil-Spec Lower Parts Kit is produced by Recoil Technologies [https://www.davidsondefense.com/#] with high-quality steel & brass components.
Brand Info: .
Platform: Mil-Spec AR-15
FCG Included: The Mil-Spec Recoil Technologies kit comes with a Mil-Spec Fire Control Group to ensure reliable operation and ignition of hardened rifle primers.
Grip: The Mil-Spec lower parts kit includes an A2 style grip and grip screw to complete your AR-15 lower receiver.
Weight: The overall weight of the Recoil Technologies Mil-Spec Lower Parts Kit is 0.505lbs.
An AR-15 bolt carrier group is a piece of a firearm that houses many important parts such as the firing pin, gas key, cam pin, extractor, and bolt. With all these pieces working together the BCG can grab and feed another round out of a detachable magazine, chambers and engages the cam groove, engage with the locking lugs in the barrel, fire, and extract a spent cartridge. During the extraction of a cartridge, the BCG works to absorb the force of the explosion by expanding gas in the carrier. During this process gas is tapped off from the barrel and is sent into the cup inside of the gas key, creating an inertial force that sends the Bolt Carrier Group back into the buffer tube which helps to minimize the recoil of your gun when firing and the cycle will repeat for subsequent shots.
About this BCG: This 5.56 NATO Slabside Complete BCG has a simple, classic design. It is machined from 9310 steel which means this BCG is tough and durable. The nitride finish helps make it resistant to corrosion and increases its strength. It has been MPI and HPT tested to ensure its quality. All of these characteristics make this is a high-quality, durable BCG.
Caliber Compatibility: .223 Rem, 5.56 NATO, .300 BLK, .350 LGND - This BCG is standard for the .223 Rem, 5.56 NATO, .300 BLK, .350 LGND calibers, and is interchangeable between all 4 simultaneously.
Finish: Nitride - Nitriding is a process during manufacturing that diffuses nitrogen into the steel to make a case-hardened surface for improved resistance and strength. A Nitrided BCG typically has a gloss black texture.
Material: 9310 Alloy Steel - Bolt Head - 9310 Steel is a low alloy steel that is a mixture of nickel, chromium, and molybdenum. This steel is built to have high core hardness and high fatigue strength which make it the perfect steel to hold up in the harsh environments of the bolt head
8620 Alloy Steel - Body - 8620 Steel is a carburized alloy steel meaning carbon was added to increase hardness of the steel. 8620 is known for its high case toughness and high core toughness. Made mostly of nickel, this steel can easily withstand the blowback of the BCG when a firearm is being fired.
Forward Assist Notches: This BCG comes with forward assist notches which allow the forward assist on the upper to contact the BCG pushing it forward and locking the bolt into place. These forward assist notches can also help clear malfunctions in a speedy manner when the BCG becomes jammed.
Gas Key: Direct Impingement - Direct impingement is the process of directing the gas created during the operation of a firearm through the barrel, gas block, gas tube, and eventually into the BCG again to cycle the action and prepare the firearm for another round.
The Charging Handle on the AR-15 is a simple latching design that indexes with the gas key on your bolt carrier group, this allows you to charge your rifle, eject and feed rounds manually.
About this Charging Handle: This AR-15 charging handle assembly for AR-15 style rifles is built with an aluminum construction and a black nitride finish. It features latches on both sides for use with either hand.
Fits all AR-15 platform guns by DMPS, Mega, Aero precision, CMMG, and most other companies.
Ambidextrous: This AR-15 charging handle can manipulated from both sides, improving ergonomics for both left and right handed shooters.
Latch Style: Extended Latch - Extended Latch Charging handles allow the user more surface area to grip and engage with the charging handle. While this extendeds just a bit further out from the upper receiver, extended latches are great for users with gloves or those want just a bit more leverage.
Platform: This charging handle is designed for the AR-15 platform. This will not work on the LR-308 platform.
This Omega Mfg. AR-15 end plate allows the attachment of slings with quick detach slings swivels. It easily installs in minutes and will replace the original factory receiver end plate. This will allow you to attach a sling for a 180 degree range of motion to smoothly transition from one shoulder to the other and avoid snagging on your clothes or other gear while shooting. It is also great for easy tactical carry when not in use. No gunsmithing is required, fits both commercial and mil-spec buffer tube.
To view the most up-to-date shipping times Click HERE. To view Warranty, Returns, Terms & Restrictions Click HERE. 