The Mod-1 is an ultra compact quick disconnect suppressor rated for .223 Remington and 5.56 NATO, constructed from 416 stainless steel with a high-temperature black Cerakote finish. At 5.25 inches in length and 1.625 inches in diameter, it is compatible with 1.375x24 HUB mounting systems and is full-auto rated with no barrel length restrictions. The design incorporates blowback reduction to minimize gas blowback through the charging handle, enhanced heat dissipation and thermal dispersion, and reinforced wear surfaces for extended service life. The Rearden Atlas HT ASR threaded mount and an SPB HT muzzle brake are included. The SPB HT muzzle brake is rated for cartridges up to .338 RUM and .375 H&H, however the Mod-1 suppressor itself is rated for .223 Remington and 5.56 NATO only. The muzzle device rating does not extend the suppressor caliber rating.
The Mod-1 is constructed from 416 stainless steel, a free-machining stainless alloy that provides corrosion resistance and dimensional stability under the repeated heat cycles of suppressor use. The high-temperature black Cerakote finish is applied over the stainless steel exterior and is formulated to withstand the elevated surface temperatures generated during sustained fire. The enhanced heat dissipation and thermal dispersion design addresses heat management across the suppressor body, and the reinforced wear surfaces at the mounting and engagement points are designed to maintain dimensional integrity over extended service life. The full-auto rating confirms the suppressor is built to handle the sustained heat and pressure of automatic fire without barrel length restrictions on the host platform.
The Mod-1 uses a quick disconnect mounting system compatible with 1.375x24 HUB threaded mounts, allowing for rapid attachment and removal from the host firearm. The Rearden Atlas HT ASR threaded mount is included and provides the host-side interface for the quick disconnect system. The included SPB HT muzzle brake is rated for cartridges up to .338 RUM and .375 H&H at the muzzle device level. The Mod-1 suppressor itself is rated for .223 Remington and 5.56 NATO only. The muzzle device caliber rating does not extend the suppressor caliber rating beyond .223 Remington and 5.56 NATO.
May Dropship from Davidson Defense.
Follow safe handling and manufacturer instructions. Ensure compliance with all applicable federal, state, and local laws. Suppressor purchase requires compliance with NFA regulations. Verify compatibility with your specific host firearm and mounting system before use. Use only within the suppressor caliber rating of .223 Remington and 5.56 NATO regardless of included muzzle device rating.
Model: Mod-1 Quick Disconnect Ultra Compact Suppressor
Suppressor Caliber Rating: .223 Remington / 5.56 NATO
Mounting System: Quick Disconnect (QD)
Thread Compatibility: 1.375x24 HUB Compatible
Length: 5.25"
Diameter: 1.625"
Material: 416 Stainless Steel
Finish: High-Temperature Black Cerakote
Full-Auto Rated: Yes
Barrel Restrictions: None
Blowback Reduction: Designed to minimize gas blowback through the charging handle
Thermal Design: Enhanced heat dissipation and thermal dispersion
Durability Features: Reinforced wear surfaces for extended service life
Included Mount: Rearden Atlas HT ASR Threaded Mount
Included Muzzle Device: SPB HT Muzzle Brake
Muzzle Device Caliber Rating: Rated for cartridges up to .338 RUM and .375 H&H
Important Note: While the included SPB HT muzzle brake is rated for magnum calibers up to .338 RUM and .375 H&H, the Mod-1 suppressor itself is rated for .223 Remington / 5.56 NATO only. The muzzle device rating does not extend the suppressor's caliber rating.
To view the most up-to-date shipping times Click HERE. To view Warranty, Returns, Terms & Restrictions Click HERE.
