1. Home
  2. Firearms
  3. Alias AR15 Lower, Rare Breed FRT 15C3, Enhanced Stock
Alias AR15 Lower, Rare Breed FRT 15C3, Enhanced Stock
Alias AR15 Lower, Rare Breed FRT 15C3, Enhanced Stock-1

Alias AR15 Lower, Rare Breed FRT 15C3, Enhanced Stock

On sale: $836.99 $629.99
Retail Price$836.99
You Save:$207.00(25%)
Part Number: S-PI-R-LR15-66628
Availability: In Stock. Free Shipping.
Firearm Purchase Guide

Choose Options

*
*

Details

No Logo AR15 Rifle Lower Kit With Rare Breed FRT 15C3 Trigger, H3 Buffer and Enhanced Stock With Rubberized Recoil Pad

The Alias No Logo lower build kit is built around a M4 AR-15 lower receiver with no logo, paired with a Rare Breed FRT-15C3 two-stage, 3-position forced reset trigger. It includes a mil-spec lower parts kit with an A2 grip and an Armaspec H3 Sound Mitigation Buffer on a mil-spec carbine buffer tube. The rear of the kit is finished with the mil-spec enhanced stock. The FRT-15C3 requires a full-auto profile bolt carrier group, which is not included. Upper receiver is not included.

Key Features

  • M4 AR-15 lower, forged 7075-T6, Type III hardcoat black, no logo
  • Rare Breed FRT-15C3 two-stage, 3-position forced reset trigger (Safe / Semi / FRT)
  • Ambidextrous selector and anti-walk pins included with the trigger
  • Mil-spec lower parts kit with A2 pistol grip
  • Mil-spec heavy-duty 6-position carbine buffer tube, 6061 aluminum
  • Armaspec H3 Sound Mitigation Buffer Gen 3, 5.6 oz equivalent, captured spring
  • Mil-spec end plate and carbine castle nut
  • Mil-spec enhanced stock, vented skeletonized body, rubberized recoil pad
  • BCG and upper receiver not included

Lower Receiver

The lower receiver is the M4 AR-15 lower, forged from 7075-T6 aluminum with a black Type III hardcoat anodized finish. It follows the standard AR-15 mil-spec pattern and has a low shelf trigger pocket with an M16 cut. The exterior carries minimal markings with no logo, with safe and fire markings on both sides. It is made in the USA and accepts standard AR-15 upper receivers and lower components.

Rare Breed FRT-15C3 Trigger

The fire control group is the Rare Breed Triggers FRT-15C3, a drop-in, 3-position forced reset trigger made in the USA. Its ambidextrous selector has Safe, Semi and FRT positions. In Semi it is a two-stage trigger, with about 2.5 lbs of take-up and about 2 lbs at the wall for a 4 to 4.5 lb total pull, and in FRT mode it is a single-stage pull of about 5 to 5.5 lbs. The housing is 7075 anodized aluminum with heat-treated S7 steel internals, and the trigger comes with its selector drum, long and short selector levers, anti-walk pins with screws and two T10 Torx wrenches. It fits mil-spec AR-15 lowers and requires a full-auto profile bolt carrier group.

Lower Parts Kit

A mil-spec AR-15 lower parts kit covers the rest of the lower. It includes the magazine catch and release, bolt catch, pivot and takedown pins, trigger guard and buffer retainer. The detents, springs and roll pins for those parts are in the kit. A black mil-spec A2 pistol grip is included as well.

H3 Buffer System

The rear of the kit uses a mil-spec heavy-duty 6-position carbine buffer tube in black Type II anodized 6061 aluminum, with a 1.145 in mil-spec outer diameter and a 7.15 in length. Inside it sits an Armaspec Sound Mitigation Buffer Gen 3 in the H3 weight, a single-stage captured buffer and spring assembly. It is about 5.6 oz equivalent (6.71 oz as a complete system) and is built to keep the spring from rubbing the inner wall of the tube. A mil-spec steel receiver end plate and a black carbine castle nut complete the rear hardware.

Stock

The stock is a mil-spec enhanced stock in black reinforced polymer with a skeletonized tactical body and dual vent slots up top. An extended upper surface gives a broad cheek weld. The rubberized recoil pad has an aggressively textured, full-height contoured rear face. A textured spring-loaded lever adjusts the length of pull, and an integrated side sling mounting point is built in.

Follow all manufacturer instructions and safe handling practices.
Ensure compliance with all applicable federal, state, and local laws.
BCG and upper receiver are not included.

Specifications

Product Type: AR-15 Rifle Lower Build Kit

Model: Alias No Logo

Platform: AR-15

Lower Receiver: M4, Forged 7075-T6 Aluminum

Lower Finish: Type III Hardcoat Anodized, Black

Trigger Pocket: Low Shelf, M16 Cut

Markings: No Logo

Trigger: Rare Breed Triggers FRT-15C3, Two-Stage, 3-Position Forced Reset

Selector Positions: Safe / Semi / FRT, Ambidextrous

Semi Pull Weight: About 4 to 4.5 lbs (Two-Stage)

FRT Mode Pull Weight: About 5 to 5.5 lbs (Single-Stage)

Trigger Materials: 7075 Aluminum Housing, Heat-Treated S7 Steel

Trigger Includes: Selector Drum, 2 Levers, Anti-Walk Pins, T10 Screws and Wrenches

BCG Requirement: Full-Auto Profile BCG (Not Included)

Lower Parts Kit: Mil-Spec, A2 Grip

Buffer Tube: Mil-Spec Heavy-Duty 6-Position Carbine, 6061 Aluminum, Type II Anodized

Buffer Tube Diameter: 1.145 in (Mil-Spec)

Buffer: Armaspec Sound Mitigation Buffer Gen 3, H3

Buffer Weight: 5.6 oz Equivalent, 6.71 oz Complete

Recoil Spring: Captured in Buffer Assembly

End Plate: Mil-Spec, Steel, Black

Castle Nut: Carbine, Black

Stock: Mil-Spec Enhanced Stock

Stock Material: Reinforced Polymer

Stock Color: Black

Stock Recoil Pad: Rubberized, Textured

Stock Sling Attachment: Integrated Side Sling Point

BCG: Not Included

Upper Receiver: Not Included

Check out our Shipping and Processing Times
Check out our Warranty/Returns and Terms and Conditions
Check out our State Restrictions page

No logo AR15 lower build kit with Rare Breed FRT-15C3, LPK, carbine tube, H3 SMB and Enhanced stock. BCG and upper not included.

Related Items

Davidson Defense Estoc 16 in 5.56 AR15 Full Build Kit, EX Stock
$411.99 $309.99 Sale
In Stock. Free Shipping.

Recently Viewed Items

Logo