Custom Deal Mercury Precision 80% Billet Lower
+ Recoil Technologies Trigger
+ Recoil Technologies Anti Walk Pins
Mercury Precision 80% Billet Lower
The scientists and engineers have been hard at work in the workshop and laboratory creating a billet AR-15 80% lower receiver that is out of this world. The end result of this brain trust is a brand simply known as Mercury Precision. Mercury Precision 80% lowers are machined from 6061-T6 Billet Aluminum, the end result being a very high end product. The goal with Mercury Precision was to create a high end product that does not require a space travel budget to afford.
This Mercury Precision 'Carme' Billet AR-15 80% Lower Receiver has full mil-spec part compatibility ensures maximum customization. This lower can withstand the harshest punishment from any situation using ultra-tough design, precision machined from aircraft-grade billet aluminum for superior strength. This lower receiver has a heavy-duty, integral trigger guard. This lower also has a unique, breakthrough design for easy bolt catch installation with a regular punch eliminates need for an expensive special tool. This raw 80% lower receiver can be painted or dipped, allowing for total customization of your lower.
We can ship this item straight to your door because raw 80% lowers are not considered firearms by the ATF. No FFL required. Feel the rewarding satisfaction of milling your own lower receiver. Mag well will best work with name brand Magazines like Magpul.
Brand: Mercury Precision
Material: 6061-T6 Billet Aluminum
Made In The USA
Precision CNC Machined
Safety Selector Engravings
Integrated Trigger Guard
Raw Finish Allows Total Customization of Your Lower Receiver
Disclaimer: Rear Lug Pocket for rear takedown pin may or may not be milled out on this 80% Lower Receiver.
Recoil Technologies Trigger
This Trigger is made by a major Drop-In Trigger Manufacturer for Recoil Technologies. This trigger features a crisp and clean no-creep trigger pull with a lower trigger pull weight.
Shortest reset and the lowest amount of creep available in any drop-in trigger on the market today!
Light but very safe 3.0 lbs trigger pull.
This single-stage, non-adjustable, drop-in trigger boasts a solid 3-pound pull weight and is pre-assembled in Hard coat Anodized aluminum housing for immediate competition, hunting, and tactical applications right out of the box. This trigger features a trigger reset aid; when the hammer comes down, the trigger is pushed forward past the reset point giving you one of the fastest resetting triggers on the market.
Trigger pin size 0.154" No Colt 0.170" large pin available
Wrench size is 5/64
Made from American A2 steel, the Trigger, Disconnect, and Hammer designed for ultimate strength and corrosion resistance.
Instructions for installing Drop-In AR-15 and AR-10 trigger group.
1. If installing in a receiver that already has a trigger and hammer installed, remove the trigger pin and hammer pin and remove the trigger and hammer as well as the grip, safety selector and detent. New receivers, install the drop-in trigger before mounting the grip.
2. Insert the trigger pack into the fire control compartment
3. Insert the hammer and trigger pins. Anti-walk type pins work much better, as standard pins can drop out.
4. Towards the rear of the trigger cassette you will see two small set screws. With the trigger and hammer pins in place, turn those set screws down to raise the trigger the point that there is pressure created on the trigger and hammer pins which will hold them in place. This step is VERY important and will take care of the slight dimensional differences between lower receivers.
5. Install the retainers on the anti-walk pins
6. Insert the safety selector switch. The hammer needs to be in the cocked position. Take care as it is inserted to not push the selector into the back extension of the trigger. Replace the safety detent, spring and grip.
7. At this point you can test the trigger pull and reset.
Recoil Technologies Anti Walk Pins
Recoil Technologies anti-walk pins are great for drop-in triggers; they replace the original hammer and trigger pins and are retained by special retaining for a positive lock. One side is flared and broached, and the other side is threaded for a screw. Fits small pin lowers (.154").
Made of blackened chrome vanadium tool steel
Allen wrench is 1/16th
These are some of the best anti-walk pins on the market.
Retained in the gun, so dirt will not cause a stoppage
The metal is hard, so there will never be any bending or warping.
Great for drop-in triggers and Mil-Spec triggers.
Works with both forged and billet uppers
The competitions pins will not work with billet uppers, but ours do.
This is not anti-rotate; it is anti-walk. That means the pins will not fall out.
One blackened finish stainless steel screw
Pins are .154" diameter, and 1.05" long
These pins replace the original hammer and trigger pins.
*Note: Screw type may vary Please note: If the listing says "In-Stock" it means we have the item(s) in stock. Please check this LINK to view our most up to date shipping status.
Warranty, Returns & Terms: Davidson Defense offers a 30 day return, refund and exchange policy. You must email or call Davidson Defense and obtain an RMA number prior to any return, refund, or exchange. All returns must include the original order number, receipt or invoice, along with the customers billing address, shipping address, contact phone numbers, contact emails, and RMA number. Returns, refunds, and exchanges may take up to two weeks, not including transit times, for processing after we have received return product. Return shipping costs will be the responsibility of the returning party, with the exception of the wrong item being received or on warranty exchange during the first 30 days after delivery. Items returned for warranty will only be replaced or exchanged, no refund given on warranty items.