1. Home
  2. Shop All
  3. Custom Deal AR-15 Trigger Upgrade Kit Including Davidson Defense 2 StageTrigger + CMMG Lower Parts Kit + Spikes Tactical Pro Grip + Davidson Defense Anti Walk Pins
Custom Deal AR-15 Trigger Upgrade Kit Including Davidson Defense 2 StageTrigger + CMMG Lower Parts Kit + Spikes Tactical Pro Grip + Davidson Defense Anti Walk Pins
Custom Deal AR-15 Trigger Upgrade Kit Including Davidson Defense 2 StageTrigger + CMMG Lower Parts Kit + Spikes Tactical Pro Grip + Davidson Defense Anti Walk Pins

Custom Deal AR-15 Trigger Upgrade Kit Including Davidson Defense 2 StageTrigger + CMMG Lower Parts Kit + Spikes Tactical Pro Grip + Davidson Defense Anti Walk Pins

On sale: $206.99 $99.99
Retail Price$206.99
You Save:$107.00(52%)
Part Number: CO-82419
Availability: In Stock.
Custom Deal AR-15 Trigger Upgrade Kit Including Davidson Defense Two Stage Trigger
 + CMMG Lower Parts Kit 
+ Spikes Tactical Pro Grip
 + Davidson Defense Anti Walk Pins

Here at Davidson Defense our primary objective to provide simple, effective, and affordable means to build a custom AR. One of the most effective ways to improve accuracy while shooting experience is by upgrading your trigger assembly. An upgraded trigger mechanism allows the shooter to shoot more accurately with a lower pull weight, provides a comfortable pull as compared to stock triggers, and is more ergonomic. One frustration people have when upgrading any part is knowing which parts are compatible with each other. That's why we created the Custom Deal Trigger Upgrade Kits, the easiest way to have an enhanced shooting experience at the most affordable price.

Recoil Technologies "Wasatch" Drop-In 3.0 lbs Trigger System Crimson Red Finish New "Deluxe" Mode

Recoil Technologies single-stage, non-adjustable, drop-in trigger boasts a solid unheard of 3-pound pull weight and is pre-assembled in hard coat anodized aluminum housing for immediate competition, hunting, and tactical applications right out of the box. This trigger features a trigger reset aid; when the hammer comes down, the trigger is pushed forward past the reset point. This gives you one of the fastest resetting triggers on the market.

FEATURES:
Ultra High Quality 
Made From Solid Billet A2 Tool Steel ( Hardened To 58-60 Rockwell) Ultra Hard
This Trigger Uses Higher Quality Steel Than Almost Every Trigger In The Market.
Most Companies Use Cheap 17-4 Stainless Or 1450 Cr Mo
Recoil Technologies Uses Certified A2 Tool Steel 
Forge Heated 1200F Machine Hammered & Peened Between 250 Times To Guarantee That The Hammer Will Never Breaks & The Steel Is Fully Tempered No Other Trigger Company Does What This Recoil Technologies Does To Give You The Finest Trigger Available.
Made from American Certified Tool Grade A2 steel, the Trigger, Disconnect, and Hammer Frog Leg Springs That Are Made From The Highest Quality Spring Steel Here In Utah That gives This Trigger The Ability To Go Down To 3.0 LBS Yet Be Ultra Reliable And Strong Enough To Fire Surplus Ultra Hard 7.62x39 Primers & Even 308 Primers with Ease Then Its Given Its Badge A Crimson Red Finish that stands for ultimate in trigger strength & corrosion resistance, even smoother trigger pull giving this ultra-match trigger system the power to give you that extra bit of Accuracy out of your gun you have been looking for. Surpassing The Competition In Price & Quality 
Uses Regular Trigger Pins (Pin size, 0.154")  Davidson Defense Recoil Technologies Top Shelf 2 Stage High Polish Nickel Boron Trigger

Davidson Defense is pleased to offer the new Top Shelf Recoil Technologies 2-Stage Nickel Boron Trigger. With a durable Nickel Boron finish, this trigger ensures a smooth pull and crisp break every time you squeeze the trigger. The two stages of this trigger consist of an initial 4.5 lb pull that brings you to a wall, where the hammer and trigger are set to break for the shot. After that, it's a 2 lb pull to fire, helping you to make accurate shots with short resets in between. These adjustable triggers are specially designed for competition, hunting, tactical, and military use, where both accuracy and robustness are critical. As an adjustable trigger, the first and second stage weight distribution, as well as, total pull weight, over-travel, and sear engagement are all to be tuned to the shooters preference. 

The Service trigger pull weights are biased with most of the pull weight on the first stage. This will allow a light second stage with an icicle-sharp break, effectively giving your weapon a match-grade trigger let-off. Perfect for all precision tactical shooting and squad Designated Marksmen, the higher first stage weight helps in high-stress shooting situations. The fast lock time assists the shooter in getting every ounce of accuracy out of his weapon. The Hi-Speed hammer uses a full-power hammer spring which imparts more kinetic energy into the firing pin, producing much more consistent primer ignition - especially with experimental cartridges or AR-10 based weapons.

FEATURES:
Smooth and crisp two stage trigger pull
Polished mechanical surfaces on the trigger and hammer
Self-lubricating Nickel Boron coating
Compatible with Mil-Spec lower receivers with .154 pin holes
Trigger and hammer pins not included
Made in the U.S.A.

Parts Included:
2-Stage Nickel Boron Trigger
2-Stage Nickel Boron Hammer
2-Stage Disconnector
Trigger spring
Hammer spring
Disconnector spring

Instructions for installing Drop-In AR-15 and AR-10 trigger group.

1. If installing in a receiver that already has a trigger and hammer installed, remove the trigger pin and hammer pin and remove the trigger and hammer as well as the grip, safety selector and detent. New receivers, install the drop-in trigger before mounting the grip.

2. Insert the trigger pack into the fire control compartment

3. Insert the hammer and trigger pins. Anti-walk type pins work much better, as standard pins can drop out.

4. Towards the center of the trigger cassette you will see two small set screws. With the trigger and hammer pins in place, push the trigger spring towards the center with your Allen wrench and turn those set screws down to raise the trigger the point that there is pressure created on the trigger and hammer pins which will hold them in place. This step is VERY important and will take care of the slight dimensional differences between lower receivers. 

5. Install the retainers on the anti-walk pins

6. Insert the safety selector switch. The hammer needs to be in the cocked position. Take care as it is inserted to not push the selector into the back extension of the trigger. Replace the safety detent, spring and grip.

7. At this point you can test the trigger pull and reset.  

CMMG Lower Parts Kit, AR-15, Gunbuilder's Kit 

AR-15 Gun builders kit includes most of the necessary parts to build up your lower group except the commonly upgraded parts. Does not include Trigger Guard, Fire Control Group, and pistol grip.  This Lower Parts Kit has True Mil-Spec Quality Made By Fire for Effect.

Made In The USA By A Major Government Contractor

INCLUDES:
Safety Selector
Selector Spring
Selector Detent
Bolt Catch Spring
Bolt Catch
Bolt Catch Roll Pin
Magazine Catch Button
Magazine Catch
Magazine Catch Spring
Front Pivot Pin
Pivot Pin Detent Spring
Takedown Pin
Take Down Detent
Buffer Retainer Pin
Buffer Retainer Spring


Spike's Tactical AR-15 Pro Grip Polymer Matte Black

Spike's Tactical is a US-based AR manufacturer that creates high-quality parts, uppers, and complete rifles. Every component is manufactured to Mil-Spec standards and is backed by the Spike's Tactical lifetime warranty. This particular pistol grip is made from high quality impact resistant polymer and features a matte black finish.

FEATURES:
Spike's Tactical AR-15 Pistol Grip
Impact Resistant Polymer Pistol Grip
Spikes Pro Grip
Spikes Logo
Matte Black
Manufacturer Part #: SAG0701

SPECIFICATIONS:

Brand: Spike's Tactical

Model/Style: Pro Grip

Material: Polymer

Color: Black

Internal Storage: No

Finger Grooves: No


Recoil Technologies Anti-Walk Pins

Recoil Technologies anti-walk pins are great for drop-in triggers; they replace the original hammer and trigger pins and are retained by special retaining for a positive lock. One side is flared and broached, and the other side is threaded for a screw. Fits small pin lowers (.154"). 

FEATURES:
Made of blackened chrome vanadium tool steel
Corrosion-resistant 
Allen wrench is 1/16th
These are some of the best anti-walk pins on the market.
Retained in the gun, so dirt will not cause a stoppage 
The metal is hard, so there will never be any bending or warping.
Great for drop-in triggers and Mil-Spec triggers.
Works with both forged and billet uppers 
The competitions pins will not work with billet uppers, but ours do. 
Patent-pending design 
This is not anti-rotate; it is anti-walk. That means the pins will not fall out.

INCLUDES: 
One blackened finish stainless steel screw
Pins are .154" diameter, and 1.05" long

These pins replace the original hammer and trigger pins. 

*Note: Screw type may vary

Please note: If the listing says "In-Stock" it means we have all of the items in stock. Please check this LINK to view our most up to date shipping status. 
Warranty, Returns & Terms:
Davidson Defense offers a 30 day return, refund and exchange policy. You must email or call Davidson Defense and obtain an RMA number prior to any return, refund, or exchange. All returns must include the original order number, receipt or invoice, along with the billing address, shipping address, contact phone numbers, contact emails, and RMA number. Returns, refunds, and exchanges may take up to two weeks, not including transit times, for processing after we receive it. Return shipping costs will be the responsibility of the returning party, with the exception of the wrong item being received or on warranty exchange during the first 30 days after delivery. Items returned for warranty will only be replaced or exchanged, not refunded.

Related Items

Recently Viewed Items